Brandtech-scientific Transferpette electronic User Manual download pdf (Page 53)

➞

English

Press the pipetting key once

to discharge the liquid. The

rhombus is shown in the dis-

play. The liquid is discharged

very slowly.

6. Discharge liquid

in the GEL mode

Interrupt discharging

To interrupt discharging,

press the pipetting key

again. The display shows the

volume discharged prior to

interruption.

Press the ENTER key after

the last pipetting operation.

The display shows ‚blo‘ for

blow-out.

7. Initiate blow-out

Press the pipetting key

once to initiate the blow-out

process. The residual liquid

is discharged.

After the residual liquid is

discharged (blow-out), the

display moves back to the

start position.

8. End pipetting

Electrophoresis (GEL) Mode

What to do How to do it Keys to press Display readout

The GEL mode operates using a very slow discharge speed to prevent swirling of the samples. To assure

optimal discharging into a gel, this discharge speed is fixed for the GEL mode. This speed is significantly

slower than level 1 and cannot be selected individually.

Note:

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 174 175

No comments

Brandtech-scientific Transferpette electronic User Manual Page 53